Latest Update

This week’s update centres on the 1 December workplace exposure-limit transition, electrical and fall risks, Queensland plumbing pathways, Victorian enforcement, South Australian undertakings and Western Australian supply pressure. New Zealand commercial-building owners also have a 4 December consultation deadline.

AUSTRALIA - NATIONAL 

Fifteen model Codes updated ahead of the exposure-limit transition  

Safe Work Australia has updated 15 model Codes of Practice for the move from workplace exposure standards to workplace exposure limits. The revisions change terminology and add air-monitoring guidance across areas including hazardous chemicals, confined spaces, excavation, demolition, spray painting, welding, silica and chemical labelling. 

From 1 December 2026, businesses must work to the WEL list as implemented in their jurisdiction. Until 30 November, the current WES list continues. Model Codes do not automatically operate as law everywhere; each jurisdiction determines approval and implementation. 

Pool builders, technicians, aquatic operators and manufacturers should match the substances used or generated at work against the revised list. Review dust, welding fumes, solvents, coatings, combustion gases and chemical vapours, then confirm whether controls, air monitoring or health monitoring need to change. Do not assume every substance has a new limit. 

Primary references:

https://www.safeworkaustralia.gov.au/media-centre/news/model-codes-practice-updated-support-transition-workplace-exposure-limits

https://www.safeworkaustralia.gov.au/safety-topic/managing-health-and-safety/workplace-exposure-limits-airborne-contaminants/changes-between-wes-and-wel 

NEW SOUTH WALES

Electrical-shock prosecution reinforces overhead-line controls  

SafeWork NSW reports that Civil 1 Pty Ltd was convicted and fined $238,000 after a 16-metre steel reinforcement cage buckled and contacted two 11 kV overhead powerlines. A worker suffered an electric shock. The company pleaded guilty to an offence under section 32 of the Work Health and Safety Act 2011 for failing to comply with its section 19(1) duty. The regulator notes that an appeal may be lodged. 

The incident was not a pool project, but the control issue is directly relevant to excavation reinforcement, steel cages, cranes, concrete booms and long conductive equipment used on pool sites. Before delivery or movement, identify line voltage and clearances, consult the network operator where required, plan the lift and cage stability, use a competent spotter and maintain an effective exclusion zone. 

Practical action: site documentation should show how overhead services were identified and how the planned work stays outside the danger zone. A generic SWMS without site-specific distances and movement controls is unlikely to be enough. 

Primary reference:

https://www.safework.nsw.gov.au/news/safework-media-releases/company-fined-%24238%2C000-after-worker-suffers-an-electric-shock 

QUEENSLAND 

Mobile-scaffold alert: guardrail graspers can detach  

Workplace Health and Safety Queensland has updated its alert after a worker fell 4.5 metres when a mobile-scaffold top rail detached. The alert says the grasper was fitted on the outside of the standard rather than the working-platform side. It also records a separate 2023 incident involving a faulty automatic latch. 

The precise cause of the recent incident has not been confirmed. The regulator advises that edge protection must be installed and maintained correctly, manufacturer instructions should specify the preferred orientation, and graspers fitted to standards should be positioned so outward force acts on the grasper throat rather than the latch. 

Pool businesses using mobile scaffolds around structures, heating systems or commercial plant should inspect latch condition and rail orientation before use. Non-standard applications need advice from the manufacturer, supplier, installer or a suitably experienced engineer. 

Primary reference:

https://www.worksafe.qld.gov.au/news-and-events/alerts/workplace-health-and-safety-alerts/2026/aluminium-scaffold-graspers 

Streamlined occupational plumbing pathways are in force  

Queensland’s plumbing licensing changes allow eligible Australian apprentices who complete the required apprenticeship and Certificate III units to move directly to an occupational licence. Former occupational plumbers, drainers and restricted licensees may also be able to return within 10 years without reassessment or gap training, subject to eligibility and exclusions. Existing provisional licensees can ask QBCC about upgrading.  

This change concerns occupational licences. It does not remove contractor-licence requirements or expand the scope of work a person may legally perform. Pool and spa businesses employing plumbing workers should check each person’s licence class and conditions rather than relying on the qualification alone.  

Practical action: review workforce records, identify eligible provisional or returning licensees, and confirm the separate contractor or nominee requirements before anyone contracts for work. 

Primary references:

https://qbcc.qld.gov.au/news/plumbing-licensing-changes

https://qbcc.qld.gov.au/licences/apply-licence/available-licences/plumbing-drainage-licences/occupational-plumber-drainer

VICTORIA 

Victorian exposure-limit arrangements confirmed Prepare  

WorkSafe Victoria has published a two-page information sheet confirming that the WEL list replaces the WES list from 1 December 2026. Most national limits apply from that date, but Victoria has transition arrangements for 15 substances until 30 November 2029. 

Victorian pool and aquatic businesses should use the Victorian material when checking substances and dates. Review chemical inventories, safety data sheets, dust- and vapour-generating tasks, extraction, respiratory protection and monitoring arrangements. Where the applicable substance or exposure profile is uncertain, obtain occupational-hygiene advice. 

Practical action: do not apply another jurisdiction’s transition dates to Victorian work. Record the substance, the applicable Victorian limit and the evidence supporting the selected controls. 

Primary references:

https://www.worksafe.vic.gov.au/resources/information-sheet-workplace-exposure-limits-victoria

https://www.worksafe.vic.gov.au/workplace-exposure-standards-and-limits 

Tree-cutting fall: use the right specialist and work platform  

WorkSafe Victoria reports that IntraAust Properties Pty Ltd was convicted and fined $150,000, with $13,335 in costs, after a worker fell from a 3.7-metre A-frame ladder while cutting a large tree branch. The branch struck the ladder and the worker suffered a spinal injury. The company pleaded guilty to failing to maintain a safe system of work and failing to prepare a SWMS for high-risk construction work. 

Pool projects often involve access clearing, landscaping and work near established trees. The regulator says it was reasonably practicable to engage a qualified arborist, use an elevated work platform or suitable long-reach equipment, and prepare the required SWMS. 

Practical action: keep tree removal outside the incidental duties of unqualified site workers. Verify specialist competence, ground conditions, fall controls and the SWMS before work begins. 

Primary reference:

https://www.worksafe.vic.gov.au/news/2026-11/company-fined-after-worker-paralysed-tree-cutting-fall 

SOUTH AUSTRALIA 

New guidance explains enforceable undertakings Awareness 

SafeWork SA has released information on enforceable undertakings, reporting that more than $12 million has been committed to South Australian work health and safety initiatives since 2015. An undertaking may be accepted as an alternative to prosecution for alleged Category 2 or Category 3 offences, subject to the regulator’s assessment and monitoring. 

This is enforcement-process guidance, not a new defence or automatic alternative to prosecution. SafeWork SA states that expected expenditure must exceed the likely court fine and that activities should deliver benefits beyond ordinary legal compliance. 

Practical action: businesses and advisers dealing with a serious incident should preserve evidence, obtain legal advice early and avoid treating a community project or training initiative as a substitute for immediate compliance and incident controls. 

Primary reference:

https://safework.sa.gov.au/news-and-alerts/news/news/2025new/%2412-million-invested-in-eus-in-sa 

WESTERN AUSTRALIA 

Brick-supply package targets current construction delays Commercial awareness  

The Western Australian Government has announced up to $12.8 million in further measures to increase brick supply and assist small and medium builders. The package follows support to recommission the Cardup brickworks, expected to come online by March 2027 and increase State production by about 10–15 per cent. 

The announcement is broader than pool construction, but it may affect residential schedules, trade sequencing, access and cash flow where pool work forms part of a home build. Government support does not itself change fixed-price contracts, extension-of-time rights or variation rules. 

Practical action: builders and pool contractors should document material availability and programme effects, give notices within the contract timeframes and avoid assuming that industry-wide shortages automatically entitle a price increase or delay claim. 

Primary reference:

https://www.wa.gov.au/government/media-statements/Cook%20Labor%20Government/Further-investment-to-boost-Western-Australia%27s-brick-supply-20261110 

NEW ZEALAND 

Earthquake-prone-building guidance consultation remains open Prepare  

MBIE is consulting on draft guidance for New Zealand’s revised earthquake-prone-building system, which is intended to operate from 1 July 2027. The proposed system focuses on unreinforced masonry buildings and buildings three storeys or taller made of heavy materials in medium and high seismic zones.

 

The connection to pool and spa work is indirect but relevant for existing commercial aquatic centres, hotels, health clubs and mixed-use buildings. Owners, engineers and consultants may need to understand whether a facility remains within the system, what strengthening or securing work is required, and how access to pool plant and public areas will be managed. 

This is consultation material, not a commenced technical rule. Facility owners and advisers with affected buildings should test the draft methodology against real sites and submit specific implementation issues by 4 December 2026. 

Primary reference:

https://www.mbie.govt.nz/about/news/have-your-say-on-draft-earthquake-prone-building-guidance

Need clarity or support?

NextGen Experts provides practical, independent advice on contracts, compliance, technical issues, disputes and business operations across the swimming pool and spa industry. If you need help understanding a change or deciding what to do next, please reach out.

www.nextgenexperts.com.au | info@nextgenexperts.com.au | 0449 065 841

Spiros Dassakis
Principal Consultant | NextGen Experts
www.nextgenexperts.com.au

Spiros Dassakis

Who We Are

Experience that brings context, judgement and perspective

NextGen Experts is an independent specialist consultancy providing technical, commercial, regulatory and dispute-related support across the swimming pool and spa industry and related sectors.

Our work draws on more than two decades of industry experience spanning construction, servicing, standards, regulation, education, business operations, governance and dispute resolution.

That breadth matters. Many issues cannot be understood by looking at a contract, standard or technical requirement in isolation. They need to be considered in the context of how the industry operates, how work is delivered, what the regulatory framework requires and what is reasonable in practice.

NextGen Experts brings that broader perspective to every engagement.

What We Bring

Industry Experience: Practical experience across pool and spa construction, servicing, maintenance, products, suppliers, contractors, consumers and industry organisations.

Technical & Regulatory Knowledge: A detailed understanding of standards, compliance requirements, regulation and industry practice, together with experience interpreting how those requirements apply in real-world situations.

Executive & Commercial Experience: Senior executive experience across industry operations, governance, membership organisations, commercial strategy, training, stakeholder engagement and organisational development.

Standards & Industry Representation: Longstanding participation in Australian and Australian/New Zealand Standards

development, including committee leadership, technical contribution and industry representation across a broad range of pool, spa and related standards.

Expert Reports & Dispute Support: Independent technical assessment, expert reports, review of competing technical opinions and dispute support for lawyers, insurers, builders, suppliers and consumers where swimming pool and spa issues need to be properly investigated, understood and clearly explained.

About Spiros Dassakis

NextGen Experts is led by Spiros Dassakis, who has worked across the swimming pool and spa industry for more than 20 years.

His experience includes senior executive roles with the Swimming Pool & Spa Association, extensive involvement in Australian Standards development, industry representation, regulatory engagement, education and training, business advisory work and dispute-related matters.

Spiros has contributed to more than 30 Australian and Australian/New Zealand Standards and has participated in standards development since 2008. His contribution to Standards Australia was recognised for 20 years of service and participation.

He also established IRLearning, a registered training organisation developed to support industry education, skills development and nationally recognised training.

Through his executive and industry roles, Spiros has worked with builders, contractors, suppliers, manufacturers, regulators, government agencies, industry associations, lawyers, insurers and consumers.

That experience now underpins the work of NextGen Experts.

Practical Experience Beyond the Textbook

NextGen Experts is not limited to providing a technical interpretation of an issue.

Our role is often to bring together the contract, technical requirements, standards, regulation, industry practice, available evidence and practical circumstances to help clients understand the issue and determine an appropriate way forward.

Whether the matter involves construction, compliance, a product, a dispute, industry policy, standards development, training or business operations, the focus remains the same:

Understand the issue. Establish the position. Provide practical direction.

https://www.nextgenexperts.com.au
Next
Next

Latest Update